广东莹瞬精密磨床特性：
1、研磨精度提高grinding accuracy improved
莹瞬磨床工作台面精度保证200×400mm(试磨片x6片，其高度差为0.005mm），研磨表面光洁度为Ra0.32。
200 x 400mm ensure transient working table surface precision grinder Ying (test plate X6, the height difference is 0.005mm), grinding surface roughness Ra0.32.
2、高精度之独立主轴high precision independent spindle
莹瞬磨床主轴采用独立设计，搭配CP4级精密斜角滚珠轴承、V3级低震动马达与动平衡后，为普通型主轴之三倍刚性，直接安装于机头座上，更加强头部之强度，保证主轴之偏转远低于0.002mm；为主轴在超精密磨屑中的精度保证及硬质合金正切削时提供充足的动力。
Independent design by Ying instantaneous spindle, collocation CP4 precision angular contact ball bearing, V3 low vibration motor and the dynamic balance, is a common type of spindle three times of rigid, directly mounted on the headstock, the head of the more strong strength, ensure the deflection spindle is much lower than that of 0.002mm; the main shaft in ultra precision grinding precision and the hard alloy chips provide adequate power is cutting.
3、高刚性、高强度铸件体high rigidity and high strength casting body
莹瞬磨床主机座、工作台、滑座、立柱及机头等各重要铸件体均采用高级铸铁FCD300，并经由有限元分析与计算，达到刚性倍增与质量的工程需求，每件铸件均经过内应力消除处理，确保长久不变形，并具极佳的抗弯及抗扭应力，确保机床长时间之研削精度。
The host seat, casting Ying instantaneous grinder worktable, a sliding seat, column and machine body adopts advanced iron FCD300, and through the finite element analysis and calculation, to achieve rigid multiplication and engineering demand quality, each piece of casting after treatment to eliminate internal stress, ensure long-term deformation, bending and torsion and with excellent stress, ensure the long time of precision grinding machine.
4、高传动超轻滑动之工作台硬轨结构hard rail structure of high transmission and super light sliding table
莹瞬磨床前后双V，左右1V一平，均贴附U.S.A耐磨片TURCITE-B，以及手工精密铲花。保证工作台在负荷的情况下，不仅减低阻尼系数，且滑动顺畅、耐磨，确保移动轻快与精度准确，最适合成型超精密研磨。
Ying Heng grinding machine before and after double V, around 1V flat, are affixed with U.S.A wear-resistant film TURCITE-B, as well as hand precision shovel flowers. To ensure that the work platform in the case of load, not only reduce damping coefficient, and smooth sliding, wear-resistant, to ensure smooth and accurate movement, the most suitable for forming ultra precision grinding.
5、电气控制、图型化操作面板electrical control and graphical operation panel
莹瞬磨床专业设计电气控制系统，符合3C欧洲CE安全要求，采用国际知名品牌的电气组件。固定式操作面板设计，操控集中于操作面板上，符合人体工学，操作面版采图型化设计，功能一目了然，操作简便易学。
It is specialized in the design of electrical control systems, in line with 3C European CE safety requirements, the use of internationally renowned brands of electrical components. The design of the fixed operation panel focuses on the operation panel, and conforms to the ergonomic design. It is easy to read and easy to operate.
机床数据/型号 Machine data / model | 单位 Company | YS-520 |
工作台面积 Table area | mm | 200×460 |
研磨最大长度 Maximum grinding length | mm | 540 |
研磨最大宽度 Maximum grinding width | mm | 280 |
砂轮轴心至工作台距离Distance between grinding wheel axis and table | mm | 465 |
左右手动行程 Left hand travel | mm | 540 |
前后手动行程 Manual travel | mm | 280 |
前后手轮（每刻度）(of time) before and after the handwheel | mm | 0.02 |
前后手轮进刀量（每转一圈）Front and rear handwheel feed (per turn) | mm | 4 |
上下手轮（每刻度） On the handwheel (moment of) | mm | 0.01 |
上下手轮进刀量（每转一圈）Feed amount on the upper wheel (one turn per turn) | mm | 2 |
砂轮尺寸（外径×宽度×孔径）Wheel size (outer diameter * width * aperture) | mm | 205×20×31.75 |
主轴速度（60HZ/50HZ） Spindle speed (60HZ/50HZ) | rpm | 3450/2850 |
主轴马达(V3级) Spindle motor (class V3) | Kw/HP | 1.5/2 |
水泵 马达 Suction / pump motor | w | 90 |
机床重量（约） Machine weight (approx.) | KG | 1350 |
机床外形尺寸 长×宽×高Dimensions of machine tool length * width * height | mm | 1800×1400×1850 |
※本公司由于技术研究改进之需要，因此保有更改设计和制造权利，上述规格若有更改恕不另行通知
